>
Replacement |
1. |
Pull it up and remove the rear seat cushion assembly (A). |
2. |
Install in the reverse order of removal.
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
After loosening the mounting bolts and then pull it up and remove the rear seat back assembly (A).
|
3. |
Disconnect the rear seat back extension connector (A) and airbag connector (B). |
4. |
Install in the reverse order of removal.
|
Driving at night
Because night driving presents more hazards than driving in the daylight, here
are some important tips to remember:
Slow down and keep more distance between you and other vehicles, as it may ...
Rear Disc Brake Components and Components Location
Components
1. Guide rod bolt2. Bleed screw3. Caliper body4. Caliper bracket5. Inner pad shim6. Brake pad7. Pad retainer
...
Front fog light
Fog lights are used to provide improved visibility and avoid accidents when visibility
is poor due to fog, rain or snow etc. The fog lights will turn on when fog light
switch (1) is turned to ...