>
Removal |
1. |
Remove the rear wheel and tire (A) from rear hub .
|
2. |
Disconnect the rear stabilizer link (C) & height sensor (B) from the rear lower arm by loosening the nut (A).
|
3. |
Loosen the bolt (A), nuts (B), flange bolt (C), lock nuts (D).
|
4. |
Install in the reverse order of removal. |
5. |
Check the alignment.
(Refer to Tires/Wheels - "Alignment") |
Inspection |
1. |
Check the bushing for wear and deterioration. |
2. |
Check the rear lower arm deformation. |
3. |
Check the all bolts. |
4. |
Check the coil spring pad for deterioration and deformation. |
Components and Components Location
Component Location
1. AVN head unit2. Front LCD monitor3. Blue Link keyboard (Option)4. AUX jack5. Rear monitor spliter6. Steering wheel remote controller (SWRC)7. AVN rear keyboard8. External am ...
Emergency braking
If there is a problem with the foot brake while driving, emergency braking is
possible by pulling and holding the EPB switch.
However, braking distance will be longer than normal condition.
WARNIN ...
Rear Door Module Components and Components Location
Component Location
1. Rear door module
...