>
Removal |
Take care not to scratch the crash pad and related parts. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the LCD monitor bezel (A) from the front seat back. |
3. |
Remove the front seat back cover.
(Refer to Body - "Front Seat Back Cover") |
4. |
Remove the rear LDC monitor after removing the connetors (A) and bolts (B). |
Installation |
1. |
Install the rear LCD monitor to the rear seat. |
2. |
Install the LCD monitor bezel.
|
Specifications
Specifications
ItemsSpecificationsRated voltage5VLoadMax. 1mA (Relay load)Detection illuminationsTail lampON : 74 ± 16 (Lux), 2.36 ± 0.08 (V)OFF : 148 ± 32 (Lux), 4.52 ± 0.1 (V)Head lampON : 18.5 ...
Lower Arm Repair procedures
Removal
[Front Lower Arm]
Replacement the lateral arm
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect ...
Components and Components Location
Component Location
1. Power mirror2. Power mirror switch3. Electrical folding mirror switch
...