>
Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear glass defogger relay (A) from the engine room relay box. |
3. |
There should be continuity between the No.87 and No.30
terminals when power and ground are connected to the No.86 and No.85 in
the relay. |
4. |
There should be no continuity between the No.87 and No.30 terminals when power is disconnected. |
Specifications
Specification
Air Conditioner
ItemSpecificationCompressorType7VSX18Oil type & CapacityPAG 120± 10cc (4.1±0.3oz.)Pulley typeAround rubber damperDisplacement180cc/revCondenserHeat rejection18,50 ...
Seat Belt Pretensioner (BPT) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the safety belt (A) by turning it in the direction of arrow using a flat ...
Front Impact Sensor (FIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front impact sensor connec ...