>
Replacement |
1. |
Remove the hole plug (B). |
2. |
After loosening the mounting bolt, then remove the rear door outside handle cover (A).
|
3. |
Remove the rear door outside handle (A) by sliding it rearward. |
4. |
Disconnect the rear door outside handle connector (A). |
5. |
Install in the reverse order of removal.
|
Front Seat Belt Pretensioner Components and Components Location
Component Location
1. Front seat belt pretensioner
...
Air Spring Repair procedures
Removal
•
Before replacing the relevant parts, use GDS equipment to fully discharge the air from the relevant parts.
(Refer to Air Suspension System - "Repair procedures ( ...
Resetting the Sunroof
If the battery has been discharged or disconnected, or if the related fuse has
been replaced or disconnected, reset the Sunroof as follows:
1. The Engine Start/Stop Button must be in the ON positio ...