>
Replacement |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim") |
2. |
Disconnect the rear door inside handle lamp connector (A). |
3. |
After loosening the mounting screws, then remove the rear door inside handle (B). |
4. |
Install in the reverse order of removal.
|
Seat Belt Pretensioner (BPT) Components and Components Location
Components
...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST :
For a single wiping cycle, push the lever upward and release it with the lever
in the OFF position. The wipers will operate conti ...
Cargo weight
This figure includes all weight added to the Base Curb Weight, including cargo
and optional equipment. ...