>
Replacement |
|
|
• |
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. |
• |
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. |
• |
Take care not to bend or scratch the trim and panels. |
1. |
Remove the rear transverse trim.
(Refer to "Trunk Trim") |
2. |
Remove the luggage covering complete.
(Refer to "Trunk Trim") |
3. |
Remove the luggage under cover.
(Refer to "Trunk Trim") |
4. |
Remove the luggage side trim.
(Refer to "Trunk Trim") |
5. |
Using a screwdriver or remover, remove the rear glass lower cover (A). |
6. |
After loosening the mounting nuts, then remove the rear window glass side cover (A). |
7. |
Disconnect the connector (A), and then loosen the rear combination lamp mounting nuts. |
8. |
Loosen the rear bumper lower mounting clips. |
9. |
Loosen the rear bumper lower mounting nuts. |
10. |
After loosening the rear bumper side's mounting screw and clips, then disconnect the side's.
|
11. |
Loosen the rear bumper side upper bracket mounting nut.
|
12. |
Loosen the rear bumper mounting bolt (A) inside of the trunk. |
13. |
Disconnect the rear bumper main connector (A). |
14. |
Install in the reverse order of removal.
|
Description and Operation
Description
When reversing, the driver is not easy to find objects in the
blind spots and to determine the distance from the object. In order to
provide the driver safety and convenience, back ...
Telemetics Unit (TMU) Components and Components Location
Component
Connector Pin Information
No.DescriptionNo.Description1Ground17Battery 22Ground18Battery 13-19IGN 14Keypad ground20ACC5MIC output -21Airbag6MIC output +22Keypad input7-23-8RS422 shie ...
Overhead Console Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console lamp (A) after loosening the overhead console lamp screw(2EA).
3.
Disconnect the sunroof switch conn ...