>

Hyundai Equus: Radiator Grill Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Front Bumper / Radiator Grill Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover")

2.	Remove the radiator grill center bracket mounting rivet and then loosen the screws.

3.	Remove the radiator grill center bracket (A).

4.	Loosen the radiator grill mounting screws.

5.	Unlock the lock pins (B) by pushing it up with a screwdriver or remover and then remove the radiator grill (A).

6.

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Replace any damage clips.

Radiator Grill Components and Components Location

Component Location 1. Radiator grill ...

Rear Bumper

...

See also:

SRS Control Module (SRSCM) Components and Components Location
Components ...

Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and vehicle cap ...

Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the car is being driven in severe conditions, more frequent oil and filter changes are requir ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com