>

Hyundai Equus: Purge Control Solenoid Valve (PCSV) Description and Operation - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Purge Control Solenoid Valve (PCSV) Description and Operation

Description
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

    Injector Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within t ...

    Purge Control Solenoid Valve (PCSV) Specifications
    Specification ItemSpecificationCoil Resistance (x)14.0 ~ 18.0 [20°C(68°F)] ...

    See also:

    Driving in flooded areas
    Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake perfo ...

    AFLS (Adaptive Front Lighting System) (if equipped)
    Adaptive front lighting system uses the steering angle and vehicle speed, to keep your field of vision wide by swiveling and leveling the headlamp. Turn the knob to the AUTO position when the ...

    Side Airbag (SAB) Module Components and Components Location
    Components ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com