>
The purpose of the pre-safe seat belt is to tighten the seat belt during emergency braking, or when a loss of control is sensed.
CAUTION
The pre-safe seat belt activates only when the passenger is wearing his/her seat belt.
The pre-safe seat belt warning light will illuminate if a malfunction is detected with your pre-safe seat belt.
Have the system checked if:
• The light comes on while the vehicle is in motion.
In order to maximize the safety of the passenger, the pre-safe seat belt system operates as below
• The seat belt is tightened when:
- Emergency braking situation occurs
- Losing control of the vehicle
- The passenger leans to one side
• The seat belt vibrates when:
- The Lane Departure Warning System (if equipped) detects the vehicle has moved out of its lane
CAUTION
Do not be surprised when the seat belt vibrates. It's not a malfunction but a warning for your safety.
Other functions are winding a loose seat belt after unfastening the seat belt.
Ignition Coil Specifications
Specification
ItemSpecification Primary Coil Resistance (x)0.62 ± 10% [20°C (68°F)]Secondary Coil Resistance (kx)7.0 ± 15% [20°C (68°F)]
...
Oil Pressure Switch Repair procedures
Inspection
1.
Check the continuity between the terminal and the body with an ohmmeter.
If there is no continuity, replace the oil pressure switch.
2.
Check the continuity between the terminal ...
Power Door Lock Actuators Repair procedures
Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
(Refer to Body - "Front Door Module")
3.
...