>
Inspection |
1. |
When checking the driver power window switch, select a vehicle type and "IPM" menu. |
2. |
Select "DDM (Driver Door Module)". |
3. |
Select option "Input/Output monitoring". |
4. |
To check the input value of power window switch in force mode, select option "ACTUATION TEST". |
1. |
When checking the assist power window switch, select a vehicle type and "IPM" menu. |
2. |
Select "ADM (Assist Door Module)". |
3. |
Select option "Input/Output monitoring". |
4. |
To check the input value of power window switch in force mode, select option "ACTUATION TEST". |
Smart Key Unit Repair procedures
Removal
Smart Key Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel after loosening the mounting screws.
(Refer to Body - "Crash Pad Lower Panel")
...
Seats
...
Power Window Motor Repair procedures
Inspection
Front Power Window Motor
1.
Remove (-) negative battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door")
3.
Disconnect the motor connector from the mot ...