Hyundai Equus: Power Trunk Module
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Body Electrical System / Power Trunk Module
- Components and Components Location
- Description and Operation
- Repair procedures
- Troubleshooting
- Power Trunk Module Drive Unit Components and Components Location
- Power Trunk Module Drive Unit Schematic Diagrams
- Power Trunk Module Drive Unit Repair procedures
- Power Latch Repair procedures
- Power Striker Repair procedures
Rear Glass Defogger Timer Repair procedures
Inspection
While operating the components, check whether the operations are normal as shown in the timing chart.
1.
Once ALT "L" is ON, if the defogger is switched ON, the defogger will stay ON f ...
Components and Components Location
Component Location
...
See also:
35R Clutch Control Solenoid Valve(35R/C_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Auto Defogging Sensor Description and Operation
Description
The auto defogging sensor is installed on the front window
glass. The sensor judges and sends signal if moisture occurs to blow out
wind for defogging. The air conditioner control m ...
Driver Door Module (DDM) Description and Operation
Description
1.
Driver Door Module (DDM)
(1)
Main features
ItemExplanationNotesInstallation positon Driver side door trimComponent configuration
1.
Embedded with CAN Communication IC
2.
...