>
Replacement |
1. |
Remove the air cleaner (A). |
2. |
Loosen the nut and then remove the air filter (A). |
3. |
Remove the front bumper.
(Refer to Body - "Front Bumper") |
4. |
Remove the left head light.
(Refer to Body Electrical System - "Head Lamp Leveling Device") |
5. |
Disconnect the all connecter. |
6. |
Remove the mounting bolt, pressure hose (A), return hose (B).
|
7. |
Installation is the reverse of the removal. |
Electronic Hydraulic Power Steering (EHPS)
This system uses an electromotor to assist you with steering the vehicle.
If the engine is turned off or if the EHPS becomes inoperative, you may still
steer the vehicle, but it will require increa ...
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution
caused by blow-by gases being emitted from the crankcase.
This system supplies fresh filtered air to the crankcase thr ...
Limousine Interior
Interior A
Front inner pillar tooling hole (O9)Cowl cross bar mounting hole (O11)Front door checker mounting hole (O11)Side sill inner reinforcement tooling hole (O7)Seat belt height adjuster upp ...