>
Replacement |
1. |
Drain the power steering fluid. |
2. |
Remove the front wheel & tire.
|
3. |
Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box.
|
4. |
Loosen the castle nut.
|
5. |
Disconnect the tie-rod end (A) from the knuckle using a SST (09568-2J100).
|
6. |
Loosen the tube bolts and then disconnect the pressure and return tube. |
7. |
Remove the steering gear box bracket (A) by loosening the bolts.
|
8. |
Remove the steering gear box (A) by loosening the bolts.
|
9. |
Installation is the reverse of the removal. |
Inspection |
1. |
Rack
|
Troubleshooting
Troubleshooting
Examples of False-Alarm Occurrence from system characteristics (It’s not a problem)
-
Characteristics of EM Wave : EM Waves are reflected against
all material and especially me ...
Outside Rear View Mirror Components and Components Location
Component Location
1. Outside rear view mirror
...
Seat Belt Pretensioner (BPT) Description and Operation
Description
The Seat Belt Pretensioners (BPT) are installed inside center
pillar (LH & RH). When a vehicle crashes with a certain degree of
frontal impact, the pretensioner seat belt helps ...