>
Inspection |
1. |
Disconnect the limit switch (A) and operate the limit switch. |
2. |
Check for continuity between the terminals. |
3. |
Make sure that the seat operation is normal in the reverse after the maximum operation. |
4. |
If there is an abnormality, replace the limit switch. |
1. |
Disconnect the limit switch and operate the limit switch. |
2. |
Check for continuity between the terminals. |
3. |
Make sure that the seat operation is normal in the reverse after the maximum operation. |
4. |
If there is an abnormality, replace the limit switch. |
1. |
Disconnect the connectors for each motor. |
2. |
With the battery connected directly to the motor terminals, check if the motors run smoothly. |
3. |
Reverse the connections and check that the motor turns in reverse. |
4. |
If there is an abnormality, replace the motors.
[Driver (IMS)]
[Assist (Limousine 5:5 Option)]
[Assist (Except For Limousine 5:5 Option)]
[Rear Assist] |
2. Evaporative emission control (including ORVR: Onboard Refueling Vapor Recovery)
system
The Evaporative Emission Control System is designed to prevent fuel vapors from
escaping into the atmosphere.
(The ORVR system is designed to allow the vapors from the fuel tank to be loaded
into ...
TPMS
(1) Low Tire Pressure Telltale/TPMS Malfunction Indicator
(2) Low Tire Pressure Position Telltale
Each tire, including the spare (if provided), should be checked monthly when
cold and inflated t ...
Snowy or icy conditions
To drive your vehicle in deep snow, it may be necessary to use snow tires or
to install tire chains on your tires.
If snow tires are needed, it is necessary to select tires equivalent in size
and ...