>
Inspection |
1. |
Remove the front door quadrant inner cover. Take care not to damage fixing clips.
(Refer to Body - "Front Door") |
2. |
Disconnect the power door mirror connector from the harness. |
3. |
Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.
Memory Mirror
Mirror Heater
Puddle Lamp
Turn Signal Lamp
BSD Warning Lamp
ECM Function
Folding Mirror |
Description and Operation
Description
Mobile Telemetics System (MTS)
Hyundai motor companies are now faced with the task of
shifting their paradigm from vehicle-centered services to customer
valuecentered services, wit ...
Front Impact Sensor (FIS) Components and Components Location
Components
...
Smart key precautions
The smart key will not work if any of the following occur:
- The smart key is close to a radio transmitter such as a radio station or an
airport which can interfere with normal operation of th ...