>

Hyundai Equus: Photo Sensor Repair procedures - Air Conditioning System - Heating, Ventilation and Air Conditioning - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Photo Sensor Repair procedures

Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher intensive light and reduce with lower intensive light.

1. Battery
2. LIN (Local Interconnect Network)
3. Ground

Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the inside rearview mirror cover (A).

3.
Disconnect the photo sensor (A), and then remove the sensor (B).

4.
Install in the reverse order of removal.
    Photo Sensor Description and Operation
    Description The photo sensor is located at the wind shield glass. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving p ...

    Ambient Temperature Sensor Description and Operation
    Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower te ...

    See also:

    LCD Display Control
    The LCD display modes can be changed by using the control buttons on the steering wheel. (1) button : Changing LCD modes (right to left), or returning to previous position (2) button : Chan ...

    Changing the coolant
    Have coolant changed by an authorized EQUUS dealer according to the Maintenance Schedule at the beginning of this section. CAUTION Put a thick cloth around the radiator cap before refilling the co ...

    Checking the power steering hose
    Check the connections for oil leaks, damage and twists in the power steering hose before driving. ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com