>

Hyundai Equus: Passenger Airbag (PAB) Module Components and Components Location - Airbag Module - Restraint - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Passenger Airbag (PAB) Module Components and Components Location

Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Restraint / Airbag Module / Passenger Airbag (PAB) Module Components and Components Location

Components

    Passenger Airbag (PAB) Module Description and Operation
    Description The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB. ...

    Passenger Airbag (PAB) Module Repair procedures
    Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") 3. Disc ...

    See also:

    Input Speed Sensor Description and Operation
    Description Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transmission and delivers the readings to the TCM. The sensor provides critical ...

    Mode Control Actuator Description and Operation
    Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. ...

    Suspension mounting bolts
    Check the suspension connections for looseness or damage. Retighten to the specified torque. ...

    Categories

    Hyundai Equus Manuals


    © 2011-2025 Copyright www.heqmanual.com