>
Inspection |
1. |
Check signal waveform of output speed sensor using the GDS.
|
Transmission Control Module (TCM) Repair procedures
Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector as TCM side
check poin ...
Transmission Oil Temperature Sensor Description and Operation
Description
Transmission oil temperature sensor monitors the automatic Transmission fluid's temperature and conveys the readings to TCM.
It is an NTC (Negative Thermal Coefficient) sensor whose ...
Receiver-Drier Repair procedures
Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with a L wrench (A).
Tightening torque :
2.7 ~ 3.1 N.m (0.28 ~ 0.32 kgf.m, 2.0 ~ 2.3 lb-ft)
...