>

Hyundai Equus: ON/OFF Solenoid Valve Schematic Diagrams - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: ON/OFF Solenoid Valve Schematic Diagrams

Circuit Diagram

    ON/OFF Solenoid Valve Specifications
    Specifications ON/OFF Solenoid Valve x Control type : Normal low type Control pressure kpa (kgf/cmx, psi)539.36(5.5, 78.23) Internal resistance(x)10~11 ...

    ON/OFF Solenoid Valve Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    See also:

    Curtain Airbag (CAB) Module Components and Components Location
    Components ...

    Intake Actuator Description and Operation
    Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculat ...

    Rear Seat Assembly Components and Components Location
    Component Location (1) [Sadan] 1. Rear seat cushion assembly2. Rear seat back assembly Component Location (2) [Limousine] 1. Rear seat cushion assembly2. Rear seat back assembly ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com