Hyundai Equus: ON/OFF Solenoid Valve Description and Operation

Damper Clutch Control Solenoid Valve Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the resi ...

ON/OFF Solenoid Valve Specifications

Specifications ON/OFF Solenoid Valve x Control type : Normal low type Control pressure kpa (kgf/cmx, psi)539.36(5.5, 78.23) Internal resistance(x)10~11 ...

See also:

Fuel Pressure Sensor (FPS) Description and Operation
Description The fuel pressure sensor (FPS) is installed on top of the low pressure fuel pump and measures the pressure of the low pressure fuel line. Based on the current fuel pressure and the ...

Side repeater light bulb replacement (if equipped)
If the light bulb is not operating, have the vehicle checked by an authorized EQUUS dealer. ...

Cowl Side Trim Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...