>

Hyundai Equus: Multi Function Switch(MFSW) Description and Operation - Body Network System - Body Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Multi Function Switch(MFSW) Description and Operation

Description
1.
Multi Function Switch (MFSW)

(1)
Main features
Item
Description
Installation location
Multi Function Switch (right)
Component configuration
1.
ECU
2.
CAN Communication IC: Body Electrical System
3.
MFS (Light & Wiper Switch)
Main features
1.
The wiper and washer switch signals are transmitted via CAN Line
2.
Lamp (Tail Lamp, Head Lamp, Fog Lamp, Auto Light, Turn Signal Lamp) Switch signals are transmitted via CAN
3.
Wiper LOW Backup Line - Wiper Control Module
(for failsafe function in case of communication line failure)
4.
Washer relay operation.
5.
CAN communication with embedded IC (BCM CAN communication module)

(2)
For detail information about circuit diagram, refer to the multifunction switch.
(Refer to "Multifunction Switch")
    Assist Power Seat Module(APSM) Description and Operation
    Description 1. Assist Power Seat Module (APSM) (1) Main features ItemDescriptionInstallation location Lower section of the assist side seatComponent configuration 1. Embedded with CAN Commu ...

    Steering Wheel Remote Controller (SWRC) Description and Operation
    Description 1. Steering Wheel Remote Controller (SWRC) (1) Main features ItemDescriptionInstallation location Located on the driver side handle (CAN Module is embedded in the audio switch on ...

    See also:

    Rail Pressure Sensor (RPS) Specifications
    Specification ...

    Cylinder Block Repair procedures
    Disassembly Engine removal is required for this procedure.     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors ca ...

    Presure Switch Schematic Diagrams
    Circuit Diagram ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com