>
Removal |
1. |
Disconnect the rear oxygen sensor (HO2S) connector (A) on LH and RH side. |
2. |
Remove the front muffler (A) on LH and RH side.
|
3. |
Remove the center muffler (B) after removing the tunnel stay (A).
|
4. |
Remove the main muffler (A). |
5. |
Installation is reverse order of removal. |
Description and Operation
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves).
The oil pump is powered by the engine. ATF passes through the oil filt ...
Distance to distance vehicle sensor
The sensor detects distance to the vehicle ahead.
If the sensor is covered with dirt or other foreign matter, the vehicle to vehicle
distance control may not operate correctly.
Always keep the ...
Consumer information
This consumer information has been prepared in accordance with regulations issued
by the National Highway Traffic Safety Administration of the U.S. Department of
Transportation.
Your EQUUS dealer ...