Hyundai Equus: Muffler Components and Components Location

Exhaust Manifold Repair procedures

Removal and Installation 1. Disconnect the negative terminal (A) from the battery. Tightening torque : 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft) 2. Remove the engine room cover (A ...

Muffler Repair procedures

Removal 1. Disconnect the rear oxygen sensor (HO2S) connector (A) on LH and RH side. 2. Remove the front muffler (A) on LH and RH side. Tightening torque : 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m ...

See also:

Heated Oxygen Sensor (HO2S) Specifications
Specification A/F Ratio (x)Output Voltage(V)RICH0.6 ~ 1.0LEAN0 ~ 0.4 ItemSpecificationHeater Resistance (x)Approx. 9.0 [21°C(69.8°F)] ...

Components and Components Location
Component Location 1. DDM (Driver Door Module)2. ADM (Assist Door Module)3. IPM (Instrument Panel Module)4. Door lock knob5. Trunk lid actuator6. Front door lock actuator7. Rear door lock actuato ...

Thermostat Troubleshooting
Troubleshooting SymptomsPossible CausesRemedyCoolant leakage • From the thermostat gasket Check the mounting bolts • Check the torque of the mounting bolts • Retighten the bolts an ...