>

Hyundai Equus: Middle Speed Sensor Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Middle Speed Sensor Specifications

Specifications
x Type: Hall effect sensor
x Specifications
Operation condition (°C)°F
((-)40~150))
-40~302
Air gap(mm)in.
1.3(0.0512)
Output voltage(V)
High
1.4
Low
0.7

    Middle Speed Sensor Description and Operation
    Description The middle speed sensor measures the rate of rotation of the 6C outer drum inside the transmission and delivers the readings to the TCM. ...

    Middle Speed Sensor Schematic Diagrams
    Circuit Diagram ...

    See also:

    Repair procedures
    Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, and put a finger on t ...

    Trailing Arm Repair procedures
    Removal 1. Remove the rear wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the trailing arm (A) from the rear axle by loosening ...

    Fuel Tank Pressure Sensor (FTPS) Repair procedures
    Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: Refer to "Specification" Removal 1. Turn the ignition swit ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com