>
Removal |
1. |
Remove the negative(-) battery terminal. |
2. |
Remove the seats in the car.
(Refer to Body - "Front Seat Assembly") |
3. |
Remove the IMS & PSM module (A) after loosening 4 screws and 4 connectors in the botton of seat. |
Installation |
1. |
Reassemble the IMS & PSM module after connecting the connectors. |
2. |
Reassemble the seats in the car. |
Thermostat Troubleshooting
Troubleshooting
SymptomsPossible CausesRemedyCoolant leakage
•
From the thermostat gasket
Check the mounting bolts
•
Check the torque of the mounting bolts
•
Retighten the bolts an ...
Compass function
The Compass can be turned ON and OFF and will remember the last state when the
ignition is cycled. To turn the display feature ON/OFF:
1. Press and release the button
within 1 second to turn the ...
Engine Control Module (ECM) Schematic Diagrams
ECM Terminal And Input / Output signal
ECM Harness Connector
ECM Terminal Function
Connector [C200-A]
Pin No.DescriptionConnected to1Ignition Coil (Cylinder #3) control outputIgnition Coil ( ...