Hyundai Equus: Manifold Absolute Pressure Sensor (MAPS) Schematic Diagrams

Manifold Absolute Pressure Sensor (MAPS) Specifications

Specification Pressure[kPa (kgf/cmx, psi)]Output Voltage (V)20.0 (0.20, 2.9)0.7946.7 (0.47, 6.77)1.84101.3 (1.03, 14.7)4.0 ...

Manifold Absolute Pressure Sensor (MAPS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Tur ...

See also:

Fluid Components and Components Location
Components Location 1. Oil injection hole2. Oil level check plug3. Oil drain piug ...

Fuel Tank Pressure Sensor (FTPS) Description and Operation
Description Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge con ...

SRS Control Module (SRSCM) Repair procedures
Removal 1. Turn the engine OFF. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console assembly. (Refer to Body - ...