>
Inspection |
1. |
Connect the GDS on the Data Link Connector (DLC). |
2. |
Measure the output voltage of the MAPS at idle and IG ON.
|
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the manifold absolute pressure sensor connector (A). |
3. |
Remove the installation bolt (B), and then remove the sensor from the surge tank. |
Installation |
|
|
1. |
Install in the reverse order of removal.
|
Overhead Console Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console lamp (A) after loosening the overhead console lamp screw(2EA).
3.
Disconnect the sunroof switch conn ...
Smart Key Receiver Components and Components Location
Components
...
Instrument Cluster Description and Operation
Description
Communication Network Diagram
Refer to the "Body Network System" for the abbreviation information.
Function
1.
High speed CAN communication (C-CAN)
(1)
Use ...