Hyundai Equus: Line Pressure Control Solenoid Vale Description and Operation

8LR Brake Control Solenoid Valve Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Line Pressure Control Solenoid Vale Specifications

Specifications Line Pressure Control VFS x Control type : Normal high type Control Pressure kpa (kgf/cmx, psi)0~500.14 (0~5.1,0~72.54)Current value(mA)0~850 Internal resistance ...

See also:

Input Speed Sensor Repair procedures
Inspection 1. Check signal waveform of Input speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Description and Operation
Description Active type ECS is applied and it includes the self leveling function.As shown in the picture, it consists of air spring, damper, reservoir tank, compressor (with dryer), solenoid ...

How does the air bag system operate
Air bags are activated (able to inflate if necessary) only when the Engine Start/Stop Button is turned to the ON or START position. Air bags inflate in the event of a severe frontal or side co ...