>
The LCD display modes can be changed by using the control buttons on the steering wheel.
1) button : Changing LCD modes
(right to left), or returning to previous position
(2) button : Changing LCD
modes (left to right)
(3) ,
button : Changing items (upper or lower)
(4) OK button : selecting or resetting
❈ For the LCD modes, refer to "LCD Display" in this chapter.
(1) Haptic switch : changing LCD modes or items
(2) OK button : selecting or resetting
(3) RETURN button : returning to previous position
You can adjust the rotating effort of the haptic switch on the "User Settings Mode" of the LCD Display
❈ For more details, refer to "LCD Display" to in this chapter.
Brake fluid
Check brake fluid level in the brake fluid reservoir. The level should be between
“MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake fluid
conforming to DOT 3 or DOT 4 sp ...
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed contro ...