>
Inspection |
1. |
Connect the GDS on the Data Link Connector (DLC). |
2. |
Measure the output voltage of the MAPS at idle and IG ON.
|
Engine overheat
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine is probably too hot. If this happens,
you should:
1.Pull off the road ...
Operation of the parking assist system
Operating condition
This system activates when the parking assist button is pressed with the
Engine Start/Stop Button ON.
The parking assist button turns on automatically and activates the ...
Brake Booster Components and Components Location
Components
1. Brake booster2. Master cylinder assembly3. Washer4. Nut5. Vacuum hose (Lammda)6. Vacuum hose (Tau)
...