Intake Air Temperature Sensor (IATS) is included inside
Manifold Absolute Pressure Sensor and detects the intake air
temperature.
To calculate precise air quantity, correction of the air
temperature is needed because air density varies according to the
temperature. So the ECM uses not only MAPS signal but also IATS signal.
This sensor has a Negative Temperature Coefficient (NTC) Thermister and
it's resistance changes in reverse proportion to the temperature.
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Tur ...
Specification
TemperatureResistance (kx)°C°F-40-4040.93 ~ 48.35-20-413.89 ~ 16.030325.38 ~ 6.0910503.48 ~ 3.9020682.31 ~ 2.57401041.08 ~ 1.21601400.54 ~ 0.66801760.29 ~ 0.34
...
See also:
Windshield Deicer Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or plastic panel remover, remove the cluster fascia upper panel (A).
3.
Using a screwdriver or plastic panel ...
Limousine Under Body
Under body
Projected dimensions
Tooling hole (O25)Front sub frame mounting pipe (O25)Tooling hole (O14)Front sub frame mounting pipe (O27)Tooling hole (O15)Tooling & paint drain hole (O6.6 ...
Auto Door Lock/Unlock Features
You can modify some of the auto door lock/unlock features from the User Setting
Mode.
Refer to the User Setting Mode in section 4. ...