Hyundai Equus: Input Speed Sensor Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Input Speed Sensor Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Input Speed Sensor Description and Operation
| Description |
Input speed sensor is a vital unit that measures the rate of
rotation of the input shaft inside the transmission and delivers the
readings to the TCM. The sensor provides critical input data that's used
in feedback control, damper clutch control, gear setting control, line
pressure control, clutch activation pressure control, and sensor fault
analysis.
Output Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...
Input Speed Sensor Specifications
Specifications
x Type: Hall effect sensor
x Specifications
Operation condition (°C)°F((-)40~150)) -40~302Air gap(mm)in.1.3(0.0512)Output voltageHigh1.4Low0.7
...
See also:
Head Up Display Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad lower panel and then push the head u ...
Center Control Panel (CCP) Components and Components Location
Components
...
ESP Control Unit Components and Components Location
Components
[Standard]
1. Front-right tube2. Rear-left tube3. Rear-right tube4. Front-left tube5. MC26. MC17. ESP control module connector8. ESP control module(HECU)9. ESP HECU bracket
[Premiu ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com