>
Description |
Battery Repair procedures
Removal
1.
Disconnect the battery sensor connector (A), battery nagative terminal (B) and positive terminal (C).
2.
Disconnect the vent hose connector (A) from the battery air vent hole.
3. ...
Operating conditions
The indicator on the switch will illuminate when the BSD (Blind spot detection)
system switch is pressed with the Engine Start/Stop Button ON.
If vehicle speed exceeds 9.3 mph (15 km/h), the system ...
Vehicle certification label
The vehicle certification label attached on the driver’s side center pillar gives
the vehicle identification number (VIN). ...