>

Hyundai Equus: Hood Lift Repair procedures - Hood - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Hood Lift Repair procedures

Replacement
   
When removing and installing the hood lifter, an assistant is necessary.
When removing the clips, use a clip remover.
1.
Using a screwdriver (A), lift the socket clips (B) up slightly on both ends of the lifter and then remove the lifter from the bracket.

2.
Push the socket of the lifter into the bracket for installation.
   
Make sure the hood locks/unlocks and opens/closes properly.
    Hood Assembly Repair procedures
    Replacement     • Be careful not to damage the hood and body.     • When removing and installing the hood, an assistant is necessary. • When rem ...

    Hood Insulator Pad Repair procedures
    Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Installation is the ...

    See also:

    Components and Components Location
    Components Location 1. Compressor2. Air tank3. Air tube4. ECU5. Rear CDC Damper6. Rear spring7. Front air strut assembly8. G-Sensor9. Height sensor ...

    Trunk Lid Assembly Repair procedures
    Replacement     • Wear gloves to protect hands from injury.     • When removing and installing the trunk lid, an assistant is necessary. 1. Rem ...

    Power steering pump, belt and hoses
    Check the power steering pump and hoses for leakage and damage. Replace any damaged or leaking parts immediately. Inspect the power steering belt (or drive belt) for evidence of cuts, cracks, exce ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com