>

Hyundai Equus: Hood Latch Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Repair procedures

Replacement

1.	Remove the hood latch cover (A) mounting clip. (Refer to Engine Mechanical System - "Active Air Flap(AAF)")

2.

Loosen the hood latch (B) mounting bolts.

Tightening torque :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

3.	Disconnect the connector (A), then remove the wiring mounting clips.

4.

Installation is the reverse of removal.

•	Make sure the hood latch release cable is connected properly.

•	Make sure the hood locks/unlocks and opens/closes properly.

•	Adjust the latch alignment.

Hood Latch Components and Components Location

Component Location 1. Hood latch assembly ...

Trunk Lid

...

See also:

Sunvisor Components and Components Location
Component Location 1. Sunvisor2. Retainer ...

Operating HomeLink®
To operate, simply press and release the programmed HomeLink® button. Activation will now occur for the trained device (i.e. garage door opener, gate operator, security system, entry door lock, ho ...

Schematic Diagrams
Circuit Diagram Multi-view Camera System Input/Output 1. Camera input ItemSpecificationLens angle of view190 degreesAngle of viewHorizontal186 degreesVertical135 degreesFunctionProvides ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com