Hyundai Equus: Hood Assembly Components and Components Location
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Hood / Hood Assembly Components and Components Location
| Component Location |
| 1. Hood assembly |
Repair procedures
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left.
2.
Adjust the hood height by turning the hood overslam bumpers (C).
...
Hood Assembly Repair procedures
Replacement
•
Be careful not to damage the hood and body.
•
When removing and installing the hood, an assistant is necessary.
•
When rem ...
See also:
Headlight, position light, turn signal light, side marker light and front fog
light bulb replacement
(1) Position light
(2) Headlight (High)
(3) Headlight (Low)
(4) Front side marker light
(5) Front turn signal light
(6) Front fog light
1. Open the hood.
2. Disconnect the negative battery ...
Checking the power steering fluid level
With the vehicle on level ground, check the fluid level in the power steering
reservoir periodically. The fluid should be between MAX and MIN marks on the side
of the gauge at the normal tempe ...
Components and Components Location
Component Location Index
Engine Room
1. Receiver-drier2. Condenser3. Ambient Temperature Sensor4. Compressor5. Discharge Hose6. Suction & Liquid Tube Assembly7. Service Port (Low Pressure)8. ...
Categories
Hyundai Equus Manuals
