>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the head up display bezel (A). |
3. |
Remove the instrument cluster.
(Refer to Indicators And Guages - "Instrument Cluster") |
4. |
Remove the head up display unit bracket (A) after loosening ther mounting nuts. |
5. |
Remove the head up display unit (A). |
Installation |
1. |
Install the head up display unit. |
2. |
Install the head up display unit brackekt and instrumenet cluster. |
3. |
Install the head up display bezel. |
4. |
Connect the negative (-) battery terminal. |
Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 ...
Cooling system
Check cooling system components, such as radiator, coolant reservoir, hoses and
connections for leakage and damage. Replace any damaged parts. ...
Battery Replacement
If the Smart Key is not working properly, try replacing the battery with a new
one.
Battery Replacement of Conventional Smart Key
Battery Type: CR2032 To Replace the Battery:
1. Pry open the ...