>

Hyundai Equus: Glove Box Housing Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Glove Box Housing Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Disconnect the stopper (B) from the glove box (A).

2.	Disconnect the air damper (A) from the glove box (B).

3.	Disconnect the pins (A) and then remove the glove box (B).

4.	After loosening the mounting screws, then remove the glove box housing (A).

5.	Disconnect the glove box lamp connector (A).

6.

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Replace any damage clips.

Glove Box Housing Components and Components Location

Component Location 1. Glove box housing ...

Steering Column Shroud Panel Components and Components Location

Component Location 1. Steering column shroud lower panel2. Steering column shroud upper panel ...

See also:

Instrument cluster
1. Tachometer 2. Speedometer 3. Engine Coolant Temperature Gauge 4. Fuel Gauge 5. Odometer 6. LCD Display (Including trip computer) 1. Tachometer 2. Speedometer 3. Engine Coolant Temperatu ...

Interior light
When the interior light switch is in the DOOR position and all doors (and trunk) are locked and closed, the room lamp will come on for 30 seconds if any of the below is performed. - When the door ...

Cowl Side Trim Components and Components Location
Component Location 1. Cowl side trim ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com