>
Removal |
|
1. |
Remove the front bumper.
(Refer to Body- "Front Bumper Cover") |
2. |
Remove the left head lamp.
(Refer to Body Electrical System- "Head Lamps") |
3. |
Disconnect the connector (B) and nut (A-2ea) remove the G-sensor (C).
|
4. |
Install in the reverse order of removal. |
1. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Exhaust Manifold") |
2. |
Disconnect the connector (B) and nut (A-2ea) remove the G-sensor (C).
|
3. |
Install in the reverse order of removal. |
1. |
Remove the trunk trim.
(Refer to Body - "Trunk Trim") |
2. |
Remove the luggage side trim on the left.
(Refer to Body - "Trunk Trim") |
3. |
Loosen the bolt (A-2ea) and bracket nut (B-2ea) and disconnect connector (C) remove the G-sensor (D).
|
4. |
Install in the reverse order of removal. |
Carry emergency equipment
Depending on the severity of the weather where you drive your car, you should
carry appropriate emergency equipment. Some of the items you may want to carry include
tire chains, tow straps or chai ...
Symbols used in this manual
Warnings, cautions and Notices
WARNING
A WARNING indicates a situation in which harm, serious bodily injury or death
could result if the warning is ignored.
CAUTION
A CAUTION indicates a situat ...
Inhibitor Switch Schematic Diagrams
Circuit Diagram
...