Hyundai Equus: Fuses And Relays

Fuel Filler Door Open Switch Repair procedures

Inspection 1. Remove the front door trim panel. (Refer to BD group - "Front door") 2. Check the switch (A) for continuity between the terminals. 3. If the continuity is not as specified, ...

Components and Components Location

Component Location 1. Engine room junction box & FAM (Front Area Module)2. SJB (Smart Junction Box)3. Engine Room Fuse & relay box4. Passenger compartment relay box (RH) ...

See also:

Specifications
Specification ItemsBulb Wattage (W)FrontHead lamp (High)55Head lamp (Low)35 (HID) or LEDFront turn signal lampLEDFront fog lampLEDPosition lampLEDDoor mirrorLEDRearRear stop/tail lamp (Outside) L ...

ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Throttle ...

Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Tur ...