>
Replacement |
1. |
Turn the ignition switch OFF and disconnect the negative (-) battery cable. |
2. |
Remove the service cover (A). |
3. |
Disconnect the canister close valve connector (A). |
4. |
Disconnect the vapor hose (B) from the canister. |
5. |
Remove the installation bolt (C). |
6. |
Disconnect the vapor hose (A) from the connector assembly (B). |
7. |
Remove the fuel tank air filter after removing the connector assembly installation bolts (C). |
8. |
Install a new fuel tank assembly.
|
Description and Operation
Description
Front blind camera is a supplemental system that shows blind spot in front of the vehicle through the AV monitor.
The front blind camera will operate when you push the button
and shi ...
Front Seat Shield Outer Cover Components and Components Location
Component Location
1. Front seat front shield outer cover2. Front seat rear shield outer cover
...
Power Windows
The Engine Start/Stop Button must be in the ON position to be able to raise or
lower the windows.
Each door has a Power Window switch to control that door's window. The driver
has a Power Win ...