>

Hyundai Equus: Fuel Pump Control Module (FPCM) Repair procedures - Fuel Delivery System - Engine Control/Fuel System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Fuel Pump Control Module (FPCM) Repair procedures

Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Check the output voltage of fuel pressure sensor (FPS).

Specification: Refer to “Specification”

    Fuel Pump Control Module (FPCM) Schematic Diagrams
    Circuit Diagram ...

    Fuel Pressure Sensor (FPS) Description and Operation
    Description The fuel pressure sensor (FPS) is installed on top of the low pressure fuel pump and measures the pressure of the low pressure fuel line. Based on the current fuel pressure and the ...

    See also:

    System operation
    Ventilation 1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position. 4. Set the fan speed contro ...

    High Pressure Fuel Pump Repair procedures
    Removal     In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure f ...

    Front wiper deicer
    If your vehicle is equipped with the front wiper deicer, it will be operating at the same time you operate the rear window defroster. ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com