Hyundai Equus: Fuel Pressure Sensor (FPS) Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Pressure Sensor (FPS) Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Pressure Sensor (FPS) Description and Operation
| Description |
The fuel pressure sensor (FPS) is installed on top of the low
pressure fuel pump and measures the pressure of the low pressure fuel
line. Based on the current fuel pressure and the amount of fuel
consumed, the fuel pump control module (FPCM) determines whether to
activate the low pressure fuel pump. After activating the low pressure
fuel pump, the FPS continues to communicate with the FPCM to measure the
fuel pressure and control the supply of low pressure fuel.
Fuel Pump Control Module (FPCM) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Check the output voltage of fuel pressure sensor (FPS).
Specification: Refer to “Specification”
...
Fuel Pressure Sensor (FPS) Specifications
Specification
Pressure(kPa)Output Voltage(V)500.36002.511004.5
...
See also:
Tire Repair procedures
Tire Wear
1.
Measure the tread depth of the tires.
Tread depth [limit] : 1.6 mm (0.063 in)
2.
If the remaining tread (A) depth is less than the limit, replace the tire.
...
Jack and tools
The jack, jack handle, and wheel lug nut wrench are stored in the luggage compartment.
Pull up the luggage box cover to reach this equipment.
(1) Jack handle
(2) Jack
(3) Wheel lug nut wrench
...
Highway driving
Tires
Adjust the tire inflation pressures to specification. Low tire inflation pressures
will result in overheating and possible failure of the tires.
Avoid using worn or damaged tires which m ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com