>
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System -"Release Residual Pressure in Fuel Line") |
3. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump") |
4. |
Remove the sub fuel sender.
(Refer to Fuel Delivery System - "Sub Fuel Sender") |
5. |
Disconnect the suction hose (A). |
6. |
Remove the head assembly (C ) after removing the fixing hook (B). |
7. |
Disconnect the dual hose (A). |
8. |
Release the fixing hook, and then remove the free filter (A) and fuel pump motor (B). |
9. |
Remove the over pressure valve assembly (B) from the fuel filter after release the fixing hook (A). |
Installation |
1. |
Install in the reverse order of removal. |
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under
severe driving conditions. Refer to the chart below for the appropriate maintenance
intervals.
R : Replace
I : I ...
Rear Seat Frame Assembly Components and Components Location
Component Location
1. Rear seat frame assembly [LH]2. Rear seat frame assembly [RH]
...
Cluster Fascia Panel Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...