>
Inspection |
1. |
Remove the front door trim panel.
(Refer to BD group - "Front door") |
2. |
Check the switch (A) for continuity between the terminals. |
3. |
If the continuity is not as specified, replace the switch. |
Rear Pillar Trim Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Oil Pump Repair procedures
Removal
1.
Remove the sub frame.
(Refer to SS group)
2.
Drain engine oil.
(1)
Remove the oil filler cap.
(2)
After lifting the car, remove the oil drain plug and drain oil into a conta ...
Record your key number
The key code number is stamped on the key code tag attached to the key set. Should
you lose your keys, this number will enable an authorized EQUUS dealer to duplicate
the keys easily. Remove the ...