A ratchet tightening device on the threaded fuel filler cap
reduces the chances of incorrect installation, which would seal the fuel
filler. After the gasket on the fuel filler cap and the filler neck
flange contact each other, the ratchet produces a loud clicking noise
indicating the seal has been set.
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the service cover (A).
3.
Disconnect the fuel tank pressure sensor connector (A) and the ...
Replacement
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the service cover (A).
3.
Disconnect the canister close valve connector (A).
4.
Di ...
See also:
CVVT Oil Control Valve (OCV) Specifications
Specification
ItemSpecificationCoil Resistance (x)6.9 ~ 7.9 [20°C(68°F)]
...
Description and Operation
Description
Control Function
This system supports 3 kinds of main function.(Front/Rear
video display function, Expected trace of wheels display function,
Parking guide function)
The Front/Rea ...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to ...