>
Removal |
1. |
Remove the windshield wiper arm (A) and blade after removing a nut.
|
2. |
If necessary of removing the wiper blade, push both sides of lock buttons (A) and then remove the wiper blade. |
3. |
Remove the weather strip then remove the cowl top cover (A) after removing clips. |
4. |
Remove the windshield wiper motor and linkage assembly after
removing 4 bolts. Disconnect the wiper motor connector (A) and
windshield deicer connector (B) from the wiper motor & linkage
assembly.
|
Installation |
1. |
Install the wiper arm and blade to the specified position.
|
Memory Power Seat Unit (IMS & PSM) Repair procedures
Removal
1.
Remove the negative(-) battery terminal.
2.
Remove the seats in the car.
(Refer to Body - "Front Seat Assembly")
3.
Remove the IMS & PSM module (A) after loosening 4 screws ...
Trunk Lid Back Panel Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Specifications
Specifications
ItemsSpecificationsRated voltageDC 12VOperating temperature range-22 ~ +176°F (-30°C ~ +80°C)Rated loadWasher switch0.2A (Relay load)
...