>
Hyundai Equus Manuals

Hyundai Equus: Front Stabilizer Bar Repair procedures - Front Suspension System - Suspension System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Front Stabilizer Bar Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Suspension System / Front Suspension System / Front Stabilizer Bar Repair procedures

Replacement
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect the stabilizer link (A) from the front strut assembly by loosening the nut.
Tightening torque :
100.0 ~ 120.0 N.m(10.0 ~ 12.0 kgf.m, 72.0 ~ 87.0 lb-ft)

3.
Disconnect the stabilizer bar (A) from the front sub frame by loosening the bolt.
Tightening torque :
50.0 ~ 65.0 N.m(5.0 ~ 6.5 kgf.m, 36.0 ~ 47.0 lb-ft)

4.
Installation is the reverse of removal.
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the ball joint for rotating torque.
    Front Lower Arm Repair procedures
    Removal Remove the lateral arm. 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • ...

    Rear Suspension System
    ...

    See also:

    Trunk Lid Assembly Components and Components Location
    Component Location 1. Trunk lid assembly ...

    Schematic Diagrams
    Circuit Diagram ...

    Camshaft Position Sensor (CMPS) Description and Operation
    Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the pisto ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com