>
Replacement |
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly") |
2. |
Disconnect the connectors (A). |
3. |
After loosening the mounting screws, then remove the memory power seat unit (B). |
4. |
Remove the front seat belt buckle connector wiring harness (A). |
5. |
After loosening the mounting bolt, then remove the front seat belt buckle (A).
|
6. |
Install in the reverse order of removal.
|
Auto Head lamp leveling Unit Schematic Diagrams
Circuit Diagram
...
Damper Clutch Control Solenoid Valve Specifications
Specifications
Damper Clutch Control VFS
x Control type : Normal low type
Control Pressure kpa (kgf/cmx, psi)0~500.14 (0~5.1,0~72.54)Current value(mA)0~850 Internal resistance( ...
Smart key precautions
The smart key will not work if any of the following occur:
- The smart key is close to a radio transmitter such as a radio station or an
airport which can interfere with normal operation of th ...